VAC-BAG® is an inspired ultimate bike storage solution. However, the unlimited uses for this dry storage product far outweigh it's initial concept. Any type of machinery or any metal items which needs storage, will benefit from the rust prevention packaging. VAC-BAG® bike storage system provides a vacuum, corrosion prevention barrier which will keep your item like new including engines, bike parts, winter storage of dirt bikes but most of all, my passion classic bike storage making VAC-BAG® an ideal do it yourself indoor bike storage product. VAC-BAG® is a perfect storage solution for the garage, home or shed, to prevent corrosion for any period of time, a perfect gas tank rust solution.
Protect your bike inside the VAC-BAG®, the ultimate motorbike storage system.
Please follow these simple guidelines when vacuum storing your motor bike:
- When preparing the item for storage, it is a good idea to drain the petrol tank or run to a low level as petrol loses its volativity after a few weeks and it will also tend to gum up the fuel system.
- It is also a good idea to change the engine oil prior to storage as used oil becomes acidic and can corrode internal engine parts. Ideally the item should be serviced before storage and not after.
- Tyres should be inflated slightly above their normal pressure to ensure there is no pressure bulge where the tyres touch the floor.
- Batteries should be taken off the item and charged periodically. If an alarm is required then there are two ways of providing the power - run battery extension leads out of the bag to your power source, or leave the battery on the bike and connect to a battery charger that is outside the bag. If this system is adopted you must ensure that the charger does not gas the battery. A suitable charger is a Batterymaster.
- Additional Information
SKU 503975 Manufacturer Vac Bag Size L Product Group Bike Covers