Motorcycle Clothing, Parts & Accessories

01792 22 44 30

YT9B-FP JMT Lithium Ion Battery

More Views

YT9B-FP JMT Lithium Ion Battery
£68.99

Lithium-ion batteries of JMT, high tech for your motorcycle.

The latest generation of batteries identified by the red cover.

Spacer (S)
Battery is equipped with one or more spacers that are taped with adhesive tape under the battery so that the battery fits exactly into the battery box.

Indicator (I)
All batteries are equipped with a battery condition - equipped Indicator.
Simply press the test button. Lights all 3 blue LEDs, the battery fully (ful) is loaded. Lights only 2 LEDs, it is loaded only half (med). At least when only one LED (low), the battery must be charged.

With the replacement of a standard lead-acid battery with a lithium-ion battery JMT up to 5 kg in weight can be saved without significant effort.

The following benefits speak for JMT lithium-ion batteries:
- About one third of the weight of the comparable lead-acid battery
- Unbeatable ratio of cost / weight savings
- As contained in each position mountable no acid
- Does not contain heavy metals
- Balanced discharge / charge of all cells by Balancer
- Fast charging with high charge current (up to 90% in 6 min)
- Very low self-discharge (. Maximum of 5% per month)
- Even at high temperatures still good performance up to 60 ° C
- Safe technique and long service life

Lead-acid batteries can be used only 30% of their capacity due to the specific properties,
while almost 100% of the capacity can be used in lithium-ion batteries.

For this reason, the lithium batteries for JMT versions of the same start power need only one third of the capacity of a comparable lead-acid battery.
A uniform charge state of all cells is also ensured by a built-in processor ("Balancer").
The dimensions of the lithium-ion batteries using adapters correspond to the dimensions of the original lead-acid batteries.
The connections are identical, so the battery can be replaced without further adjustments in a few minutes.

Please note that only suitable for charging chargers are used, such as the JMP 800, JMP 4000 or the corresponding workshop equipment.
For fast charging, we recommend the JMP 30,000 per workshop unit. Thus, a lithium-ion battery to be charged again within 6 minutes to 90%.
The maximum recommended charge currents please refer to the specifications below.

Under no circumstances chargers may be used, trying to desulfate deeply discharged batteries 10 volts with a voltage of more than 14.9 volts before they begin the actual charge.
The maximum charging voltage of 14.9 volts must be exceeded in any case. Risk of explosion.

The manufacturer guarantees a sufficient starting capacity up to -5 degrees Celsius.

Technology
JMT use lithium-ion batteries as the cathode material iron phosphate (LiFePO4) and use the lithium-polymer methods of manufacture.
This allows them to rise still explode in flames neither in normal operation.
The engineering and the manufacturing process ensure the highest safety standard for lithium batteries.

- 12 V maintenance-free lithium-ion battery
- Recommended charging current 1.5 A
- Maximum charging current for fast charging 15 A

Comparable in dimensions and connections with:
Yuasa Manufacturer Part Number
YT7B-BS
YT9B-BS

Voltage :   12v
Capacity :   3 Ah (10 Std)
Type :   Lithium
    Maintenance free
Capacity :   36 Wh
CCA (Cold crank amps) :   180 A
Kälteprüfstrom Messmethode :   SAE
Length :   150 mm
Width :   65 mm
Height :   92
    99
    106 mm
Weight (including acid) :   0.7 kg
Terminal connection :   Front
    from above
Positive terminal :   Front left
Negative terminal :   Front right
Breather hose :   Without
Manufacturer :   JMT
Description

Details

YT9B-FP JMT Lithium Ion Battery
Additional Information

Additional Information

SKU 601021
Battery Type Lithium Ion
Voltage 12v
Manufacturers Part No. 707.00.25
Manufacturer JMT
Product Group Battery
Reviews
PayPal
Visa
Master Card
Maestro

M&P Direct Ltd. Phoenix Way, Garngoch, Gorseinon, Swansea. SA4 9HN.
Registered in England & Wales No. 3928542. VAT No. 779 4632 75.
M&P Direct Ltd. are regulated by the Financial Conduct Authority, Consumer Credit Licence Number 678577.