The Throttle Tamer creates a non-linear ratio between hand throttle rotation and carburetor or throttle body opening. The ìpulleyî, or as we call it, ìcamî pulls the throttle cable as the rider rotates the grip/tube. By altering the conventional, round cam, a vast improvement in control is achieved.
The Throttle Tamer cam has a reduced radius initially, which requires a slightly more rotation to achieve the same carburetor or throttle body opening position as a stock throttle. This virtually eliminates the jerky ìthrottle snatchî especially evident in modern fuel injected street bikes. The radius increases or ìramps upî after Ω throttle to keep the overall rotation required to reach full throttle at or near stock rotation.
Machined from 6061 aluminum in the USA! Self-lubricating Delrin bushings at each end of tube eliminate aluminum-to-aluminum contact and provide an ultra-smooth feel. Included cam is removable and can be replaced with alternate cams (sold separately) to fine tune control. Fits inside the stock throttle housing to stock cables and works with all known aftermarket cruise controls. Installs in minutes!
Suitable for the following models:
Suzuki V-Strom 1000 DL 2002 | Suzuki V-Strom 1000 DL 2003 | Suzuki V-Strom 1000 DL 2004 | Suzuki V-Strom 1000 DL 2005 | Suzuki V-Strom 1000 DL 2006 | Suzuki V-Strom 1000 DL 2007 | Suzuki V-Strom 1000 DL 2008 | Suzuki V-Strom 1000 DL 2009 | Suzuki V-Strom 1000 DL 2010 | Suzuki Half Faired 1000 SV 2003 | Suzuki Half Faired 1000 SV 2004 | Suzuki Half Faired 1000 SV 2005 | Suzuki Half Faired 1000 SV 2006 | Suzuki V-Strom 650 DL 2004 | Suzuki V-Strom 650 DL 2005 | Suzuki V-Strom 650 DL 2006
|Manufacturers Part No.||40-4D-136|