EBC brake disc for off-road motorbikes. MADE IN UK. The aim of the
development is to improve the braking behavior compared to the original
brake disc. EBC uses heat-treated carbon steel for the brake discs of
off-road motorcycles that are mainly driven off-road. This steel is
significantly more resistant to rust than cast steel. In addition, the
entire surface is protected by a 3 micron thick zinc layer, which is
braked in the area of the brake lining contact zone when braking. It
is only in this area that it is easier to form rust rust with a longer
service life. The brake discs are drilled in the bird's swing signal to
get rid of the rainwater and brake dust with as few holes as possible
while simultaneously optimizing the brake disc. The fewer drill holes
are installed, the better the wet braking behavior and the lower the
wear.
-
Rigid brake disc.
-
Made from heat-treated carbon steel.
-
Braked surface with optimized hole pattern.
-
Radially ground.
-
Galvanized to protect against corrosion.
-
Stand-alone design.
-
The thickness of the brake disc may vary from the original part.
