The Conduit should be used to route the dispenser tubing to the rear sprocket.
The silicone conduit can be cut into smaller lengths and secured to the bike for routing the dispenser assembly to the chain and sprockets. It's particularly useful in keeping the tube located around tricky areas such as the transition from swingarm to main body of the bike or sub frame.
Simply clean up the surfaces you're going to apply them to using a suitable degreaser, then using a good instant adhesive, superglue or epoxy resin, stick them in place. To get a good stick try holding them in place with cable ties until dry, then snip off the ties to leave a super discrete finish.
|Front / Rear||No|
|Manufacturers Part No.||SC-0025|
|Product Group||Chain Lubricators|
|Pad Dimensions 1||N/A|
|Pad Dimensions 2||N/A|
|Pads per set||N/A|